Our experienced technicians will work with you to find the best furnace for your home and budget and ensure a seamless installation process. Installing your heating system involves dangerous aspects like electrical lines, fuel supplies, and minor construction to your walls.
It's important to have your heating installed properly to ensure maximum safety, efficiency, and longevity.
Make Just Fix It your favorite HVAC company for consultations, quotes, and installations on any type of heating system! We are the most reliable HVAC service in the Greater Houston, TX, area.
Our team of experienced technicians have been servicing heaters in the area for years and are ready to assist with all your furnace needs.
Don't wait, contact us today!
Central Heating Installation
A central heating system allows you to heat your entire house with one system instead of having a heating system in each room.
Central heating installation includes installing a heat source like a furnace, heat pump, or boiler and installing air ducts for the heated air to travel through.
Your HVAC contractor will need to open the walls if they are installing ductwork. Ductwork installation can take one to two days, but once your ductwork is installed, you can use it for your heating and cooling.
Existing ductwork will be inspected to be sure that it's efficient and well sealed.
Your tech will do furnace installation and boiler installation inside your home, or they will install a heat pump outside.
Ductless Mini Split / Multi-Split Heating Installation
Ductless mini split / multi-split heating installation consists of installing an outdoor condensing unit and connecting it to an indoor unit called an air handler via refrigerant lines and electrical wiring.
A ductless mini split / multi-split system is minimally invasive. The installation should only require your technician to drill a small hole between the inside and outside units to run wiring and refrigerant lines, along with drilling into the wall to mount the indoor unit.
The indoor units will be installed directly into the rooms they will be heating or cooling. A ductless mini split / multi-split system is a great alternative to a full central system. Check with your favorite HVAC company to see which heating installation would be best for your home.
Heat Pump Installation
- A heat pump is an energy-efficient alternative to a furnace and an air conditioning unit that can save money on your energy bills. There are federal tax credits for having a heat pump installed.
- A technician can install a heat pump for both ductless and ducted systems.
- The heat pump outdoor unit, a condenser, will be installed outside on a concrete slab or on the side of your house.
- A ductless system / mini split heat pump connects to a heat pump via refrigerant lines and electrical wiring.
- A ducted system works by a heat pump sending heat to a central unit and distributing it through your home via your ductwork.
Furnace Installation
- A home furnace heats and circulates air throughout the building. Install a furnace that's right for you, be that an efficient gas furnace, natural gas furnace, or electric furnaces.
- Your technician will install your furnace in a spot close to an electrical outlet and a fuel supply, whether a gas supply or electricity.
- Furnace installation always requires connecting the furnace to venting for combustion and drain lines for the moisture created in the unit.
- The furnace will be connected to your ductwork via a supply plenum. The plenum takes the air heated by your furnace and sends it to your ducts for circulation throughout your home.
- Your tech will also connect your system to your thermostat.
Dual-Fuel System Installation
- A dual-fuel heating system, also known as a hybrid system, another great option for a heat source.
- Dual-fuel system installation involves combining heat pump installation and high-efficiency gas furnace installation.
- Your HVAC system alternates between using each of the two devices, depending on the season, temperature, and function needed, to maximize efficiency and effectively heat and cool your home all year.
Heating Tune-Up
A heating tune-up is a comprehensive inspection of your heating system to ensure it continues to operate safely and efficiently. This process, also known as a furnace tune-up, includes inspection, cleaning, and system service tasks.
This tune-up is essential to keep the heating system in top condition, ensuring it runs reliably and safely for the upcoming heating season.
Furnace Maintenance
Furnace maintenance includes regular inspections, cleaning, and servicing to ensure that the furnace operates safely and efficiently.
Maintenance includes inspecting the furnace for potential issues, cleaning the furnace to remove dust and debris, servicing the furnace to check and adjust components such as burners, blower fan, and thermostat, and checking the furnace's safety features and filter replacement.
Furnace Replacement
Ready to replace your furnace? Upgrade to a new, energy-efficient furnace and experience the benefits of improved heating performance and lower energy costs.
Our professional HVAC technicians will remove your old furnace, properly dispose of it, and install a new, high-efficiency model. Our furnace replacement process includes proper configuration, safety checks, and inspection to ensure your new furnace works at its best.Many of the issues people face regarding their HVAC system aren't from wear and tear but from improper installation.
What Is a Good Furnace Installation?
A good furnace installation is done by a professional, following all the manufacturer's instructions, local building codes, and safety regulations and meeting all the necessary permits and inspections. Here's what to expect:
- The HVAC technician should have the worksite protected by floor covering and do safety checks, such as shutting off electrical breakers and gas/fuel lines.
- Next, a tech will remove the old equipment, and clean the area & clear any blockages in the entry points of your ductwork.
- The technician will ensure your heat system works with your other systems, including checking the evaporator coil. If the coil is dirty, it can block airflow and prevent your new furnace from working properly.
- Finally, your technician can install the new furnace and filters. Everything should be sealed up, cleaned up, and properly tested.
What Can Go Wrong During Furnace Installation?
It's important to have a professional handle and check the installation to avoid problems like leaks in the gas lines, poor connections and installation, and lack of proper ventilation. These can be dangerous and can cause damage to the furnace and your home.
Fix More Save More
Just Fix It has many special offers for furnace installation. When you install with Just Fix It, you save more! Did you know it is illegal to perform heating or AC work in Texas without being a licensed contractor or registered technician?
Not only is it illegal, but it can also be dangerous. Improperly installed or maintained heating and AC systems can cause gas leaks, which can be deadly. It is not necessarily required to change the furnace when installing a new AC system.
Still, it may be beneficial to do so because a furnace and AC unit often work together to regulate the temperature in a home. It may be more cost-effective in the long run to replace both simultaneously. It is not always necessary, but it can be beneficial to do so. For example, a newer and updated thermostat can help improve the furnace's energy efficiency.
Additionally, it may be required to operate a more advanced furnace unit properly. Consult with your HVAC professional to determine if upgrading your thermostat is a good option for your specific situation.It depends on the specific terms and coverage of your home insurance policy. For example, home insurance policies may cover the furnace installation costs if the damage results from a covered event such as a fire or storm. Yes, it is necessary to safely remove the combustion gasses produced by the furnace. However, the specific type of venting required will depend on the type of installed furnace.
For example, a gas furnace will require a venting system to remove the by-products of combustion, such as carbon monoxide. In contrast, an electric furnace does not produce these by-products and does not require venting. A horizontal furnace installation refers to positioning the furnace with the air intake and exhaust pipes on the sides of the unit.
This type of installation is typically used in limited-space areas such as a basement or crawl space. It's also known as side-wall venting. Unlike gas furnaces, an electric furnace typically does not need to be enclosed. However, it may be recommended by manufacturers for protection against dust and debris or to improve aesthetics.
In addition, if the electric furnace is in an area exposed to moisture, it may be beneficial to enclose it. Yes, it is a good idea to have your furnace installation inspected by a professional to ensure it is installed correctly and safely.
Inspection can help prevent issues such as carbon monoxide leaks, fire hazards, and other problems that can risk your home and family.
Contact the Furnace Installation Experts Today
Our team at Just Fix It is your trusted source for furnace installation in your Greater Houston, TX, home. Call 281-617-2231 or request service online today to learn more about furnaces and other heating products to keep you comfortable.
“Just Fix It is an outstanding company that provides phenomenal services. Their personnel are highly professional, knowledgeable, and skilled. Technician Abel Anorga provided top notch service to my home in a timely manner when my family needed the air conditioning restored. Cannot thank y’all enough!”